90 Settings
HTTP profile
The phone default setting varies from service provider to service pro- vider.
•The settings have already been implemented by the provider. You can start immediately.
•Access profiles have already been created by your provider. Then se- lect and activate profile.
•The access profiles must be con- figured manually.
If necessary, check with your service provider for details. You will find the current settings for the service provider on the Internet at this address:
www.siemens.com/ mobilephonescustomercare (page 119).
I | Make the settings. |
Authentication
Activate or deactivate encrypted WAP
Fax/data
Fax/data mode using a PC
With the phone and a connected PC, you can transmit and receive faxes and data. Appropriate software for fax and data communication must be available on your PC and there must be a connection to the phone.
Fax and data services must be enabled by the service provider. There are variations in fax and data recep- tion, depending on the network. Please ask your service provider about this.
Send voice/fax | b |
Set this feature on the phone before transmission so that you can switch from voice mode to fax mode.
Rec voice/fax | b |
(Only if no special fax or data number is available).
Start the required communication program on your PC and select the feature on the phone during the call (the PC will take over the connec- tion).
End transmission
End transmission with
Rcve fax/data | b |
Your service provider has given you
anumber for phoning and a fax/data number.
The call is signaled by a special ringing tone and the type of call (fax or data) is displayed. Now start the communication program in your PC to receive the fax/data.