Siemens manual Function Integration, TP 270 can be connected to, When configuring with ProTool

© Siemens AG 2007

Operator Control and Monitoring Devices

Panels — 270 series

SIMATIC TP 270

■Function (continued)	■Integration
Configuration	The TP 270 can be connected to:

Configuring is performed using the configuring software SIMATIC ProTool or SIMATIC ProTool/Pro Configuration (see HMI

2software/configuring software or visualization software) or using the engineering software SIMATIC WinCC flexible Standard or Advanced (see HMI software/SIMATIC WinCC flexible engineer- ing software).

Projects generated using ProTool can be imported into WinCC flexible.

Applications/options

When configuring with ProTool

•SIMATIC ProAgent/MP;

fast, localized fault diagnosis in plants and machines for SIMATIC S7 and SIMATIC HMI (see HMI software/process diagnostics software SIMATIC ProAgent)

When configuring with WinCC flexible

•WinCC flexible /ProAgent;

fast, localized fault diagnosis in plants and machines for SIMATIC S7 and SIMATIC HMI (see HMI software/process diagnostics software SIMATIC ProAgent)

•WinCC flexible /Sm@rtAccess;

Remote control and monitoring as well as communication between different SIMATIC HMI systems (see WinCC flexible RT options)

•WinCC flexible /Sm@rtService;

Remote monitoring and servicing of machines/plants over the Internet/intranet (see WinCC flexible RT options)

•SIMATIC S7-200/-300/-400

•SIMATIC WinAC Software/Slot PLC

•SIMATIC S5

•SIMATIC 505

•SINUMERIK

•SIMOTION

•Non-Siemens controllers

-Allen Bradley

-Mitsubishi

-Telemecanique 1)

-LG GLOFA GM

-Modicon

-GE-Fanuc

-Omron

•Over Ethernet (TCP/IP) to higher-level PC and network printer (optionally over NE2000-compatible network card)

Additionally when configuring with WinCC flexible

•Ethernet communication with SIMATIC S7 (optionally over NE2000-compatible network card)

•Multi-protocol capability

•HTTP communication to other SIMATIC HMI systems (option- ally with the "WinCC flexible /Sm@rtAccess" option)

•SINUMERIK

(optionally with "SINUMERIK HMI copy license

WinCC flexible CE"; the "SINUMERIK HMI engineering pack- age WinCC flexible" is additionally necessary for configuration; for further information, see Catalog NC 60)

1) Cannot be connected in conjunction with WinCC flexible

Note:

For further information, see "System interfaces".

2/112

Siemens ST 80 · 2006