7
Press Keys:
Preparing the handset
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02
Charging the battery
Leave the handset for approx. 5,5 hours in
the charging unit to charge the battery, as
they are not charged when they leave the
factory. The charging status icon flashes on
the handset to indicate that the battery are
being charged:
See the appendix for a list of recommended battery.
Attaching the belt clip
Push the belt clip onto the back of the handset until the
lugs at the side click into place.
4010/4 015 Hol d down the key on the underside of
the base station.
3010/3 015 Hold down the paging-keyy on the base
station until you hear signal tones.
3020/25
3030/35
4030/35
Select settings, system settings and regi-
ster handset in the menu at the base sta-
tion telephone and confirm with OK.
3070/75
4070/75
Press the LED – it will flash during regis-
tration.
Non-Sie-
mens base
stations
To register at “GAP base stations”, follow
the relevant operating instructions
(steps 2 and 3).
●The battery heat up during charging. This is normal
and not dangerous.
●Opening the battery compartment unnecessarily
may cause the wrong charging status to be dis-
played.
5,5