Siemens Gigaset 4000 Handset, Your handset is now registered and ready for use, Handset Setup

End key and On/Off key

Intercom telephone number of the handset

Gigaset 4000 Handset

The handset included with the system is automatically registered with the base station. Up to a total of four handsets (dependent on system) may be added to any Gigaset 4010, 4015, 4210, or 4215 base.

Your handset is now registered

and ready for use.

BASIC PHONE OPERATION

Making a Call	1	Dial desired number.
	2	Press	.

Handset Setup

Before using your handset, follow these steps:

1Remove protective plastic film from display.

2 Insert batteries	3 Place cover on back
as shown.
	of handset and push
– +	gently upward	4 Place handset
	until it clicks	in charger
+	into place.
–
		with display
		facing out.

IMPORTANT: Charge batteries 12 to 14 hours before using the

handset for the first time. WARNING: Use only NiCd or NiMh “AA” rechargeable batteries. DO NOT USE ALKALINE, LITHIUM, OR NON-RECHARGEABLE BATTERIES.

Automatic Registration to Base Unit

1 Place handset in base with display facing out. Note: DO NOT press the END

LED

Lights up during a call; flashes at:

-incoming calls -new calls -new messages

Headset

Jack

Talk key

-answer a call -dial a telephone number

Directory key

Open the directory

Key 1

(Programmable) Hold down to select the answering machine or telephone company voice mail

Star key (*)

Charge status

Display screen

Current display

Soft keys

End key and

On/Off key

-end the call

-cancel function

-one menu level back (press briefly) -return to idle state (hold down)

-when the telephone is idle on/off (hold down)

	3	Press	or place handset in base
		(or charger) to hang up.
Answering Call	Lift handset from base (or charger)
	or press		.
Intercom Call	1 Lift handset.
	2	Select INT, select the desired handset’s
		intercom number, and press		.
	3	To call all handsets, select INT and
		press «or press «, select INT, and
		press	.
	4	Press	or place handset in base
		(or charger) to hang up.
SettingVolume	1 Open the Menu.
	2	Scroll to “Handset Settings” and
		press OK.
	3	Select “Handset Volume” and press
		OK.

(On/Off) key before placing handset in base. (If handset is on, turn it off.)

2 After approximately one minute, handset will register to the base and the next unassigned intercom number (2 through 4) is automatically assigned.The intercom number appears in the upper left of the handset display.The handset reverts to the idle state.

3Place handset in charger or base unit with display facing out and follow charging instructions as above.

See User Manual for additional options.

Customer Care: 1-888-777-0211

Or visit our Website: www.icm.siemens.com

Hold down to turn		Pound key (#)
on/off the ringer	Microphone	Hold down to turn
Flash key		on/off keypad
		protection
Hold key down to pause;
press to answer		Memory key
waiting call

Customer Care: 1-888-777-0211

Or visit our Website: www.icm.siemens.com

You will hear the current volume in the earpiece and its level is displayed. Scroll to the desired volume and press OK.

Setting Language 1 Open the Menu.

2Press ¬and then press Ÿ.

3 To select English (default), press Þand ];

to select French, press Þand Ÿ; to select Spanish, press Þand ^.

Paging Handset Press the page button on the base bottom.

Customer Care: 1-888-777-0211

Or visit our Website: www.icm.siemens.com

Visite nuestro sitio Web para obtener instrucciones en español. Visite nuestro sitio Web para obtener instrucciones en español. Visite nuestro sitio Web para obtener instrucciones en español.