Siemens 5930, 5935 manual Click Enable Dial Backup

SIEMENS 5930/5935 Business Gateway	Chapter 5 Advanced Setup
User’s Guide	Dial Backup

Dial Backup

Use the Dial Backup option to configure a backup connection to the Internet through an internal V.90 (model 5835 only) or an external asynchronous modem connected to the console port. This backup connection can be activated in the event of WAN service interruption. During an interruption to the WAN interface connection, the router will use the dial backup modem connection while waiting for WAN service to be restored. Once the WAN link is active again, Dial Backup will automatically switch back to the WAN service.

To configure a dial backup connection:

1.Click Dial Backup on the left navigation pane of the Router Information page. This displays the Dial Backup page.

2.Click Enable Dial Backup.

3.Enter the User name and Password to use for the dial up connection. This information is provided by your ISP.

4.In Phone number, enter the ISP’s dial up phone number.

5.Optionally, in Alternate Phone number, enter an alternate phone number to use in the event the first number is unavailable.

6.Next to Using, select one of the following to specify the type of modem to use for the dial-up connection:

•Internal Modem: Use an internal modem for the dial-up connection. (If the internal modem has not been key-enabled, the modem type will automatically be set to External Modem and cannot be changed.)

•External Modem: Use an external modem for the dial-up connection. Even if an external modem is not physically connected, External Modem can still be selected.

7.Click Apply. This displays the Dial Backup Configuration page for the type of modem selected:

•Internal Modem

•External Modem

SIEMENS 47