Colour monitor C384FA-M
A26361-K826-Z100-2-5E19 English- 5
Important note on power cable
Toguarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary
toreplace the original cable set.
·Thefemale/male receptacles of the cord set must meet CEE-22 requirements.
·Thecable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the
outersheath or on the insulation of one of the inner conductors.
·Fordevices which are mounted on a desk or table, type SVT or SJT cable sets may be used.
Fordevices which sit on the floor, only SJT type cable sets may be used.
·Thecable set must be selected according to the current rating for your device.
Powercable for devices distributed in the US and Canada
Inthe United States and Canada the cord set must also be UL-listed and CSA-labelled. The voltage
ratingshould be min. 250 volts a.c.
Pleaseconsult the following table for the selection criteria for power cables used in the United
Statesand Canada.
Cabletype Sizeof conductors in cable Maximumcurrent rating of the device
SJT 18AWG
16AWG
14AWG
10Amps
12Amps
12Amps
SVT 18AWG
17AWG 10Amps
12Amps
Forthe United Kingdom
Shouldthe plug on the flexible cord not be of the type for your socket outlets, do not use an adapter
butremove the plug from the cord and discard. Carefully prepare the end of the supply cord and fit a
suitableplug.
WARNING
THISAPPLIANCE MUST BE EARTHED
IMPORTANT
Thewires in this mains lead are coloured in accordance with the following code:
Greenand Yellow: Earth
Blue: Neutral
Brown: Live
Asthe colours of thewires in the mains lead of this appliance may not correspond with the coloured
markingsidentifying the terminals in your plug, proceed as follows:
·Thewire which is coloured Green and Yellow must be connected to the terminal in the plug
whichis marked with the letter E or by the earth symbol or coloured Green or Green and
Yellow.
·Thewire which is coloured Blue must be connected to the terminal which is marked with the
letterN or coloured Black.
·Thewire which is coloured Brown must be connected to the terminal which is marked with the
letterL or coloured Red.