Colour monitor C384FA-M
A26361-K826-Z100-2-5E19 English- 19
Nodisplay (power indicator lights)
Ê Check whether the computer is switched on.
Ê Check whether the data cable for the monitor is correctly attached to the monitor and the
monitorport on the computer.
Ê Press any key on the computer keyboard –the computer may be in energy saving mode.
Ê Alter the brightness and/or contrast until you get a picture.
Picturedisturbances (vertical and horizontal lines, picture noise)
Ê First adjust the Clockfunction to eliminate vertical bars.
Ê Then adjust the Phase function to eliminate picture noise or horizontal lines.
i
Ifone of the operating systems Windows for Workgroups, Windows 95/98, Windows NT
orOS/2 (with Windows emulation installed) is used, the monitor can be adjusted with the
floppydisk supplied.
Permanentlyunlit or lit pixels
Thestandard of production techniques today cannot guarantee an absolutely fault-free screen
display.A few isolated constant lit or unlit pixels may be present. The maximum permitted number
ofpixels faults is stipulated in the stringent international standard ISO 13406-2 (Class II).
Example:a 15" flat-screen monitor with a resolution of 1024 x 768has 1024 x 768 = 786432 pixels.
Eachpixel consists of three subpixels (red, green and blue), so there are about 2.4 million dots in
total.
Accordingto ISO 13406-2 (Class II), a maximum of 4 pixels and 5 subpixels may be defective, i. e.
atotal of 17 faulted dots. This corresponds to approx. 0.002 %of the entire screen surface!
Theflat screen monitors from Fujitsu Siemens Computers are typically considerably better than
requirementsdefined in this standard.
Thescreen becomes darker
Thebackground lighting has a limited lifetime. If your monitor display should become too dark, the
backgroundlighting will have to be exchanged. Please contact our customer service centre.
Nosound output
Inorder for the multimedia functions to be operable, a sound card (audio controller) must be
installedin your computer and properly configured.
Ê Check whether the audio cable is correctly connected.
Ê Increase the volume.