80 Setup

Call setup

 

C¢T¢Call setup

 

¢Select function.

 

Hide ID

b

When you make a call, your phone number can be displayed on the recipient's display (depending on the service providers).

To suppress this display, you can enable the "Hide ID" mode for all subsequent calls or just for the next call. You may need to register separately with your service provider for these functions.

Call waiting

b

If you are registered for this service, you can check whether it is set and you can activate/deactivate it.

Divert

You can specify the conditions under which calls should be diverted to your mailbox or other numbers.

Status check

You can check the current divert status for all conditions. After a short pause, the current situation is transmitted by the network and dis- played.

ÖCondition set.

ÕNot set.

ÔDisplay if status is unknown (e.g. with a new SIM card).

Clear all

b

All set diversions are cleared.

Set up call divert (example):

The most common condition for call divert is, for example:

Unansweredb

I

Select Unanswered.

(Includes the conditions

 

Not reachable, No reply,

C

Busy, see below)

Confirm.

Set

Select.

C

Confirm.

Ï/J Select or enter the phone number to which the calls are to be diverted.

§Mailbox§ Use existing mailbox phone numbers, or enter them if necessary.

§OK§ Confirm. After a short pause, the setting is confirmed by the network.