Setup | 85 |
| Connectivity | IrDA |
| |||
C¢T¢Connectivity | Your phone has an infrared inter- | ||||
face. With this interface, you can | |||||
¢Select function. | exchange data such as pictures, ring- | ||||
| GPRS | b | tones, Addressbook entries, busi- | |||
ness cards or organiser data with | |||||
(General Packet Radio Service) | other devices which also have an | ||||
C | Switch GPRS on/off | infrared interface. | |||
The infrared interface is on the left | |||||
GPRS is a method for transmitting | side of the phone. The distance | ||||
data faster in the mobile network. | between the two devices must not | ||||
Use GPRS and, if the network has suf- | exceed 30 cm. The infrared windows | ||||
ficient capacity, you can be con- | in both appliances must be aligned | ||||
nected to the Internet permanently. | as accurately as possible with each | ||||
Only the actual transmission time is | other. |
| |||
charged by the network operator. | Shown on the display: | ||||
Some service providers do not yet | ¯ |
| |||
support this service. | IrDA activated. | ||||
Shown in the display: | ® | During transmission. | |||
|
|
| |||
£ Activated and available. |
| Data services | |||
¢ Registered. |
| ||||
Basic setting and activation of the | |||||
¤ | Temporarily interrupted. | connection profiles for data trans- | |
mission such as MMS, WAP. | |||
|
|
Displays information on connection status.
The phone default setting varies from service provider to service pro- vider.
•The settings have already been implemented by the provider. You can start immediately.