10

Getting started

Changing CLIPIt™ covers

You can use CLIPIt™ covers (accesso- ries) to personalise the appearance of your phone as you wish.

Before changing the keypad or faceplate, switch the phone off.

Dismantle the phone

Take off the battery cover and remove the battery (see p. 8).

To remove the faceplate, insert the key into the opening provided, apply slight pressure 1and turn it at the same time2to open the lock.

Do not use the key to lift the phone as this could damage the faceplate.

Assemble the phone

First insert the keypad mat 3into the faceplate. Ensure that it is sitting exactly in place.

3

*) If there are small pins at the bottom of the faceplate: position the tabs on both sides of the keypad mat precisely on these pins. before carrying out step 4.

Insert the phone into the bottom of the upper faceplate 4and then push it in carefully until it clicks into position 5. Finally, replace battery cover (see p. 8).