Siemens C70 CT70 Security, Direct call, HTTP profile, Data services, Auto key lock, Authentication

46 Setup

Data services

Default setting and activation of the connection profiles for MMS, WAP applications. The phone default setting varies from service provider to service provider. Consult your service provider or go to this address in the Internet for more information

www.siemens.com/ mobilephonescustomercare in the FAQ section.

HTTP profile

The phone default setting varies from service provider to service pro- vider. Consult you service provider or go to this address on the Internet for more information

www.siemens.com/ mobilephonescustomercare in the FAQ section.

Authentication

Activate or deactivate encrypted WAP dial-up (CSD connections only).

Security

C¢T¢Security

¢Select function.

Auto key lock

The keypad is locked automatically if no key has been pressed for one minute in standby mode. This prevents the phone from being used accidentally. However, you can still be called and you can still make an emergency call.

Additional information

Block/unblock in standby mode.

In each case:

#Press and hold.

Direct call

Only one phone number can be dialled. The required phone code (4 to 8 digits) is set by you and entered at the first security prompt.

#To switch off, press and hold, then enter the phone code.