Siemens CFX65 Hide ID, Call waiting, Divert, Call screening, Any key answ, Minute beep

44 Setup

Call setup
C¢T¢Call setup
¢Select function.
Hide ID	b

If activated, your phone number will not appear on the other party’s display (depending on the service providers).

Call waiting b

If you are registered for this service, you can check whether it is set and you can activate/deactivate it.

Divert

You can specify when calls should be diverted to your mailbox or other numbers.

Set up call divert (example)

Unansweredb

I	Select Unanswered.
	(Includes the conditions
	Not reachable, No reply,
	Busy, see below)
C	Confirm and select Set,
	then enter the phone
	number to which the call
	will be diverted.
C	Confirm. The network set-
	ting confirms.
All calls	b

All calls are diverted.

ÇIcon in the top line of the display in standby mode.

Other possibilities for divert:

Not reachable, No reply, Busy, Receiving fax, Receiving data, Status check, Clear all

Call screening

Only calls from phone numbers that are in the Phonebook/Addressbook or in a group are signalled. Other calls are only displayed.

Any key answ.

Incoming calls can be accepted by pressing any key (except for B).

Minute beep

During the call, you (and only you) will hear a beep every minute so you can check the call's duration.