Method Two ��� Run a silent installation.
n Copy the USB driver folder from the driver CD to somewhere on the PC. (In our example,
the driver files are put under D:\Siemens WHQLed.)
o Open Start menu, key in cmd in the blank and press enter. Then click cmd.
Then click the icon.
Key in cmd and
press Enter.
p When the Command Prompt screen appears, point to the driver folder on your PC, and then
enter setup -s. Press enter to start silent installation.
q The system will install the driver automatically. You can connect your router and the PC
with a USB cable now.
r The system will detect the USB driver automatically.
Note: If the USB device is not detected, check the USB cable between the PC and
the device. Also make sure that the device is power on.
s After the file copying finished, a completing message will appear.
t You can use the router now.