Getting started

11

Additional information

The power supply unit heats up when used for long periods. This is normal and not dangerous.

If the battery is removed for longer than 30 seconds, the clock must be reset.

Changing CLIPIt™ covers

You can use CLIPIt™ covers (accesso- ries) to adjust the appearance of your phone according to your personal taste.

Please switch the phone off before changing the keypad mat or face- plate.

Dismantling the phone

Remove battery cover (see p. 9). To remove the faceplate, insert the lug on the battery cover into the opening and open the lock by simultaneously applying slight pressure 1and turning the lug 2.

2

1

Assembling the phone

Remove the old keypad mat and insert the new keypad mat 3into the faceplate. Take care that it is correctly positioned.

3

Insert the phone into the bottom of the faceplate 4and then push it in

carefully until it clicks into position 5.

5

4

CLIPit™ Covers

The new keypad has an additional key beneath the joystick to permit direct access to the Internet information from the service provider.