Siemens E50001-F710-A420-X-4A00 instruction manual General description, Scope, Design Type

General description

Scope

These instructions cover the installation, operation and maintenance of a Siemens type Vector® manual group-operated air switch. The equipment designs described in this instruction manual consists of group-operated air switch for application up to 38.0 kV. A typical type Vector manual group-operated air switch is shown in Figure 1. All diagrams, descriptions and instructions apply to all of the above classes and designs unless noted otherwise.

The equipment furnished has been designed to operate in a system having the circuit capacity specified by the purchaser. If for any reason the equipment is used in a different system or if the short-circuit capacity of the system is increased, the ratings of the equipment, including the momentary rating and the interrupting capacity of the type Vector manual group- operated air switch must be checked. Failure on the part of the user to receive approval of intended changes from Siemens may cause the warranty to be void.

Design	Type
Manual group-	Vector
operated switch

Table 1: Type Vector manual group-operated air switch

General description

Siemens type Vector manual group- operated air switch carries a type designation, as shown in Table 1: Type Vector manual group-operated air switch. This designation may appear on drawings and familiarity with them will simplify communications with the factory.

7