Important Safety Instructions

 

Table of Contents

Important Safety Instructions

 

Preparation

2

Installation

4

Final Steps

5

Please read all instructions before using this appliance.
WARNING

If the information in this manual is not followed exactly, a fire or explosion may result

causing property damage, personal injury or death

Instructions Safety
PARTS NEEDED:

•Tape Measure

•Straight Edge or Ruler

•Phillips Head Screwdriver

•Level

•Pencil

•Wire Cutters or Wire Stripper

•Wire Nuts

•Volt Meter (0-250 VAC)

•1” Hole Saw

•Hand or Saber Saw

•Drill and Drill Bit

•Safety Gloves and Goggles

•Cloth or cardboard (Optional - to Protect Floor)

WARNING

Before installing, turn power OFF at the service panel. Lock service panel to prevent power from being turned ON accidentally.

CAUTION

Do not use the oven for storage.

Unit is heavy and requires at least two people or proper equipment to move

Important:

Save these instructions for the local inspector’s use.

Installer:

Please leave the instructions with the unit for the

owner

Ow er

Please save these instructions for future reference.

Remove all tape and packaging before using the oven. Destroy the packaging after unpacking the oven. Never allow children to play with packaging material.

Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the National Electrical Code ANSI/ NFPA No. 7 latest edition (or the Canadian Electric Code) and local electrical code requirements.

Important: Local codes vary. Installation, electrical connections and grounding must comply with all applicable codes.

Install only per installation instructions provided in the literature package for this

oven

Ask your dealer to recommend a qualified technician and an authorized repair service.

Know how to disconnect the power to the oven at the circuit breaker or fuse box in case of

an emergency

Do not repair or replace any part of the appliance unless specifically recommended in the manuals. All other servicing should be done by a qualified technician. This may reduce the risk of personal injury and damage to the

oven

Never modify or alter the construction of an oven by removing panels, wire covers, screws, or any other part of the product.

DO NOT LIFT OVEN BY DOOR HANDLE. Remove the door for easier handling and installa- tion. See ‘Removing the Oven Door’ in the Maintenance section of the Use and Care Manual.

English • 1