Color monitor MCM 1902
A26361-K527-Z100-2-5E19 English- 13
Degaussingthe monitor (Degauss)
Themonitor is degaussed every time you switch it on. When color shifts occur in the screen display
dueto the influence of magnetic fields, the screen must be degaussed manually.
Ê Call the Degauss setting window.
TheDegaussing.. .screen is displayed and the screen is degaussed.
TheDegauss window reappears after a few seconds.
i
Duringdegaussing a muffled noise is produced, the colors may change and the picture
maywobble. These effects are normal.
Thereis no malfunction.
Donot use the function more often than once every half hour, as otherwise the full effect
isnot ensured.
Activatingthe factory settings (Recall)
Thereare factory settings for the picture position, picture sides (pincushion, trapezoid,
parallelogram),asymmetrical pincushion distortion, tilt distortion and moiré reduction.
Ê Call the Recall setting window.
Ê Press the !button for YES to activate the factory settings, or press the "buttonfor NO to
retainyour own settings.
Ifyou have selected YES, all settings listed above will be reset to the factory settings. All other
settingswill remain the same.
Settingmenu position (Menu Position)
Thisfunction allows you to move the menu window on the screen.
Ê Call the Menu Position settingwindow.
Ê Press the $,#,!or "button to move the menu window on the screen.
Settingmenu duration (Menu Duration)
Withthis function you can set how long the OSD menu is to be displayed each time (3, 7, 10, 20 or
50seconds).
Ê Call the Menu Duration settingwindow.
Ê Press the !or "button to choose the duration (in seconds).
Correctingunsymmetrical pincushion distortion (Pinbalance)
Unsymmetricalpin balance is when the sides of the screen displays are bent inward or outward on
oneside.
Ê Call the Pinbalance setting window.
Ê Press the !or "button to adjust the pinbalance setting.