Siemens MCM 1902 !

Color monitor MCM 1902

2 - English A26361-K527-Z100-2-5E19

!Inthis chapter you will find information regarding safety which is essential to take note of

withyour monitor.

Thechapter also contains information on the licenses issued for your equipment.

Thisdevice complies with the relevant safety regulations for data processing equipment, including

electronicoffice machines for use in an office environment. If you have any questions, contact your

salesoffice or our customer service.

• Ifthe device is brought into the installation site from a cold environment, condensation can

form.Before operating the device, wait until it is absolutely dry and has reached approximately

thesame temperature as the installation site.

• Duringinstallation and before operating the device, observe the instructions on environmental

conditionsin the chapter entitled "Technical data" as well as the instructions in the chapter

"Installingan ergonomic video workstation".

• Toensure adequate ventilation the monitor may only be operated with the monitor foot

installed.

• Thecolor monitor must not be exposed to strong magnetic fields (e. g.caused by magnetic

paperclip holders or loudspeakers). Strong magnetic fields could result in a permanent blotchy

image.

• Themonitor is automatically degaussed when switched on. This results in a magnetic field

aroundthe metal edge of the picture tube, which may damage the data on data carriers nearby.

Therefore,never keep magnetic data carriers near the monitor.

• Thedevice automatically sets itself to the correct voltage within the range from 100 V to 240 V.

Ensurethat the local mains voltage lies within these limits.

• Thedevice must be installed in such a way that the user has good access to the appliance

socket.

• TheON/OFF switch does not disconnect the device from the line voltage. To disconnect the

linevoltage completely, remove the power plug from the grounded power outlet.

• Layall cables so that nobody can stand on them or trip over them. When attaching the device,

observethe relevant notes in the chapter "Connecting the monitor".

• Ifyou use a different data cable from the one supplied, ensure that it is adequately shielded.

CEconformance and optimum picture quality are guaranteed only if you use the data cable

supplied.

• Nodata transmission cable should be connected or disconnected during a thunderstorm.

• Pleaseensure that no objects (e. g. necklaces, paperclips etc.) or liquids can get into the

interiorof the device (electrical shock, short circuit).

• Inemergencies (e. g. damaged casing, elements or cables, penetration of liquids or foreign

matter),switch off the unit, disconnect the power plug and contact your sales office or our

customerservice.

• Onlyqualified technicians may repair the device. Unauthorized opening or incorrect repair may

greatlyendanger the user (electric shock, fire risk).