Siemens 240 Cordless Phone 6 Owner’s Manual
Installation and SetupInstalling the AC Power Adapte r and Base
W arning! Use only the Siemens AC power adapter supplied with this phone.
DO NO T use an outlet controlled by a wall switch.
T he AC power adapter has two cords ending
in plastic connectors. T he larger of the two
connectors (RJ 45) plugs into the base. T h e
smaller of the two connector s (RJ 11) plugs
into a wall telephone jack. The AC power
adapter plugs into an electrical wall outlet.
Desk/Table Installation
1. Plug the large connector (RJ 45) into the base.
2. Plug the A C power adapter into a wall outlet (standard 110/120 VAC).
3. Plug the small connector (RJ 11) into a wall telephone jack.
Wa ll Installation
1. Plug the large connector (RJ 45) into the base.
2. Plug the small connector (RJ 11) into the wall telephone jack.
3. Align the mounting holes on the back of the base to the mounting posts on the
wall plate (not included).
4. Push the base down over the mounting posts until it is tight.
5. Plug the A C power adapter into the wall outlet (standard 110/120 VAC).
NOTE: If you do not have a standard wall plate, mount the base
directly to the wall (mounting screws not included).
Installation Tips
Fully char ge the battery pack for 12 hours before first using the phone. To get the
maximum range and the best sound quality from your handset,
• Install and operate the base away from electric al appliances such as televisions,
personal c omputers, microwav e o vens, and other cordless phones.
• Install the base in a high, c entral location with few obstructions.