Siemens 240 Cordless Phone 7 Owner’s Manual
Preparing the Handset Installing / R eplacing the Battery Pack
1. Press in on the battery co ver r elease.
2. Slide the battery cover
off the handset.
Battery Cover
Release
NOTE: Replacement battery packs are av ailable for sale by calling
the Siemens Customer S ervic e Center at 1 (888) 777 -0211.
Charging the Battery
• Place the handset in the base for 12 hours before first use.
• Place the handset in the base for 4 to 6 hour s to recharge.
NOTE: The battery cannot be over charged. The handset may face to
the front or back while it is in the base.
Maximizing Battery Performance
A fully charged battery pack lasts for approximately
• 4 hours when using the handset continuously (talk time)
• 7 days when the handset is not in use (stand-by time)
To maximize battery performance
• Place the handset in the base when not in use.
• Clean the charging contacts on the handset and base once each month.
NOTE: To clean the charging c ontacts, use a pencil eraser or other
contact cleaner. Do not use liquids or solvents that can damage
your phone.
CONTAINS NICKEL CADMIUM BATTERY. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. DO NOT DISPOSE OF IN
MUNICIPAL WASTE.
3. Plug the plastic connector of Battery Pack into the socket inside the battery
compartment of the handset.
4. Insert the Battery Pack into
the battery compartment.
5. T uck the battery wires
into the battery compartment.
6. Slide the battery cover onto the handset; listen for a snap.