Getting started

9

Getting started

The phone is packaged in dismantled form and must be re-assembled prior to using for the first time.

Your phone's display is supplied with a protective film. Remove this film slowly before assembling the phone.

In rare cases, static discharge may cause dis-

colouration at the edges of the dis- play. However, this will disappear within approx. 10 minutes.

Insert SIM card/battery

The service provider supplies you with a SIM card on which all the important data for your line is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges.

•Press the grooved area 1, then push the battery cover towards

the front in the direction indicated by the arrow 2.

2

1

•Place the SIM card flat in front of the slot with the contact surface facing downwards. Then push the

SIM card in using gentle pressure 3(ensure that the chamfered corner is in the correct position).

3