G1/2
46
The filters at the free end of the inlet hose and at
the back of machine should only be removed for
cleaning purposes.
To avoid water damage, the tap must be turned
OFF after using the machine.
The plastic nuts on the hose connections must
only be tightened by hand.
For tight connection between washer-dryer and
water source, you can:
2. Or you may purchase the specific water tap from
customer service. It is designed by factory. It may
be better connected with machine than your water
tap.
Note: The water tap is not free.
1. Call Customer Service before you install the
machine, get the plastic connector freely. It may
connect tightly the water inlet pipe and your water
tap.
Plastic connector
CS code 424387
Water tap
CS code 184611
Do not disassemble the water inlet hose frequent-
ly, the untight connection will lead to leakage. We
suggest that you use a water inlet hose specially
for the washer-dryer.
If you need lengthen the water inlet hose together
with the machine, please contact local ASS center/
station or leader to buy additional lengthening hose.
Additional lengthening water inlet hose is not free.
Caution: