19.3.02 SL42-SL45-ger.fm U35 /SL45i- English, A31008-H4860-A1-3-7619
76 Data exchange
Sync Station
–
You can establish a “fixed“
connection between the phone and
the PC via the Sync Station.
• Connect the mains power socket
and the Sync Station " to the
plug-in power supply.
• Connect the Sync Station # to
the serial interface of the PC using
the connecting cable.
• Insert the phone into the Sync
Station $ and press downward
until it engages.
HThe contact message is
displayed.
IrDA (Infrared)
(Menu) !Setup !IrDA
The infrared port integrated in the
phone cannot be used unless the
other device has a corresponding
port.
Align the infrared windows with
each other (max. distance 30 cm).
Data transfer is not available unless the
power supply unit is connected.
#
$
"
(Change) Activate infrared data
transfer.
Indicator on the display:
k If switched on.
l During transmission.
Integral modem
The phone has an integral modem
that is used for data exchange via
the infrared port or a cable.
Technical data
Modem driver:
Conforms to the V.25 command set.
Speed:
Conforms to ITU-T standard V.22bis
(2400, 4800 and 9600 bit/s).
Fax:
Fax at 2400, 4800, 7200 and
9600 bit/s.
Conforms to service class2.
Setting on the PC
For fax or data transfer with
communications software on your
PC you must install a standard
modem in its operating system
control panel:
• Standard modem, 19,200 bit/s,
• Fax 9600 bit/s maximum,
• infrared 115,000 bit/s.
Switching your phone off and on after using
the Data Exchange Software or Siemens
QuickSync Software lets you use the inte-
grated modem.