Siemens TC100 manual Filters, How to select and move multiple events in the filters

Configuration Tool

7.4.2Filters

You can show and hide specific events by means of a filter to make searching the archive easier. All the events listed in the Include window are displayed in the Archive table, all the events listed in the Exclude window are not displayed.

Changing the assignment of an event from the Include to the Exclude filter, or vice versa:

1.Click on the event in the Include or Exclude window. −> The selected event is highlighted blue.

2.Click the button.

−> The event is moved from the Include into the Exclude filter, or vice versa.

How to select and move multiple events in the filters:

1.Hold the CTRL button down while you select the events in the filter with mouse clicks.

−> The selected event is highlighted blue, and the blue highlighting of previ- ously selected events is retained.

2.Click the button.

−> The events are moved from the Include into the Exclude filter, or vice versa.

How to select and move successive events in the filters:

1.Click the first item in the group of events with the mouse.

2.Hold the SHIFT key down, and click the last item in the group of events with the mouse.

−> These two events and all those lying between them are selected.

3.Click the button.

−> The events are moved from the Include into the Exclude filter, or vice versa.

How to remove all events from the Include or Exclude filter:

1.Click the button above the Include or Exclude filter.

−> The contents of the Include or Exclude filter are removed. The events so removed are now available for selection in the other filter.

♥ Siemens AG 2010 All Rights Reserved	7-6
SICLOCK® TC100 Operating Instructions