TC12 Installation, Commissioning & Maintenance Handbook
Check that the status LEDs illuminate correctly, see section 6.5.1.
6.4.2 Configuration Using the Handset
With the Controller and OTU powered up, connect a handset terminal to the
Controller Main Processor handset socket.
The Integral OTU is configured using a subset of the commands used to configure
the Freestanding OTU. Commands that apply (see below) are entered in exactly
the same way as for the Freestanding OTU as described in section 3.3.3.
Commands that apply to Integral OTU:
Section 3.3.3
Subsection No Command Section 3.3.3
Subsection No. Command
1 GME, KME 49 GIU
3 GAD 50 GIC, KIC
4 GMM 51 GPV, KPV
5 GNO 52 GRD
6 GCW 53 KAC
7 GRW 54 KEL
8 GOE 55 KES
9 GSA 56 KEV
11 GRL 57 KAS
13 GIA 58 KML
14 GAQ 59 KDB
15 GIQ 60 KDI
16 GCF 61 KLM
17 GOF 62 KLS
19 GFA 63 GCT
24 GFS, KFS 67 GIO
25 GLF 68 GID
26 GLD 69 GOO
27 KLP 70 GOT
28 RFL
1 2 71 GOD
29 AMB, NEC 72 GCT
30 KCF 73 GDO, GDT
31 KAD 74 GTR
32 KDP 84 GDC, KDC
33 KDL 85 GEB, KEB
34 KFD 86 GEG, KEG
35 KMS 87 GER, KER
36 KPT 88 GFE, KFE
38 KLC 89 GBE
39 KLE 90 GRT, KRT
40 KLR 91 GSC, KSC
1 Note that the controller handset command RFL=1 clears the OTU and controller fault logs, and
extinguishes the controller fault LED, if there are no longer any faults present.
2 This command requires the PME command to be typed first.
666/HE/43100/000 Page 178 Issue 9