Siemens TOA portal module 040-020 manual Industry Sector, IA&DT

Industry Sector, IA&DT

2.Since no analog sensor exists and thus no corresponding process value is available, we have to specify the values 'Diameter_tank1' and 'Fill-level_tank1'using the watch table. Create a 'new watch table' and enter the two values. To see the current values, switch 'Monitoring mode on'.

(→ Controller 001 → Watch and force table → New watch table → Diameter_tank1, Fill-level_tank1

→ )

3.To specify the values, you have to enter a modify value in the 'Modify value' column. The values are applied in the CPU by clicking the icon 'Modify all selected values once and now'.

(→ diameter_tank1 = 10.0 → fill level_tank1 = 7.0 → )

SCE Training Curriculum	Page 24 of 30	To be used only at Educational and R&D Facilities
TIA Portal Module 040-020, Edition 03/2013		Unrestricted / © Siemens AG 2013. All Rights Reserved
SCE_EN_040-020_R1209_Startup Programming in High-Level Languages with S7-SCL and SIMATIC S7-300