Industry Sector, IA&DT
6.Complete the values at the input parameter below. Compile, save and load the program
'high_max' and output parameter 'er' as specified to the controller.
(Add other parameters → 
→ 
→ 
→ 
)
7.Check the changes in the 'Monitoring mode' of the 'calculate_tankcontent' block.
Note:
You can change the display format of the current value by
SCE Training Curriculum | Page 30 of 30 | To be used only at Educational and R&D Facilities |
TIA Portal Module |
| Unrestricted / © Siemens AG 2013. All Rights Reserved |
| ||
|
|
|
