1
INSTALLATION
BeforeYouBegin
The following instructions outline a typical water treatment system installation. Consult local plumbing codes and building regulations as they may pose different or additional requirements for the installation. The installer is responsible for ensuring that the installation is in compliance with all applicable state and local regulations.
This system has been designed for installation by a licensed professional such as a contractor or plumber. Proper completion of this installation will require basic familiarity with standard sink plumbing and proper use of common hand and power tools. Improperly installed systems could result in water damage due to leaks or flooding.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Typical Installation Diagram
A. | Product water | storage tank | I. | Product water tubing (3/8" blue) | |||
B. | Tank | J. | Reverse | osmosis membrane filter | |||
C. | Tank | tubing (3/8" | white) | K. | Carbon | ||
D. |
|
| L. | ||||
E. | Drain | connection | assembly | M . | Automatic | ||
F. | Drain | tubing (3/8" white) | N. | Inlet fitting with elbow | |||
G. | fitting | O. | Feed water tubing (1/4" green) | ||||
H. | Drain | tubing (1/4" yellow) | P. | Feed water | |||
7
