Model 203 - Hydrogen Sulfide
The Model 203 can be used in such typical applica- tions as wastewater treatment plants, laboratories and chemical plants.
Model 206 - Carbon Monoxide
The Model 206 Carbon Monoxide Gas Sensor Module can be used to provide an early warning of Carbon Monoxide accumulation in tanks, laboratories, chemi- cal plants, parking garages, vehicle test facilities and more.
SPECIFICATIONS
SENSOR TYPE: | |
RANGE: | (at 50% relative humidity) |
Model 201 | 300 - 2,000 ppm Hydrogen |
| 500 - 10,000 ppm Methane |
Model 203 | |
| 2 |
Model 206 | 50 - 500 ppm Carbon Monoxide (CO) |
RESPONSE TIME: |
|
Model 201 | Less than 30 seconds |
Model 203 | For 50 ppm alarm, if 50 ppm H2S is present: |
| |
| |
Model 206 | Less than 30 seconds |
PERIODIC |
|
MAINTENANCE: | None, other than routine calibration |
OPERATING |
|
TEMPERATURE |
|
RANGE: | |
| |
INPUT: | 9 - 24 VDC (+ 1V), 250 mA |
OUTPUT: | 0.5 amp dry contact, 100 VDC, 130 VAC |
| Nominal 5 volts DC (TTL), source 25mA. |
| SAFE and ALARM signals. |
INDICATORS: | Internal LED for calibration |
ENCLOSURE: | Class I, Division 1, Groups C, D |
ENCLOSURE | Cast aluminum for protection against |
MATERIAL: | galvanic corrosion |
SIZE: | 6.75 x 4.0 x 3.5 in |
| (17.1 x 10.2 x 6.0 cm) |
WEIGHT: | 24 oz (678 g) |
APPROVAL: | UL 60950 |
ORDERING INFORMATION
Combustible Gas | |
Hydrogen Sulfide | |
Carbon Monoxide |
2007 by Sierra Monitor Corporation Printed in U.S.A.
Sierra Monitor Corporation 1991 Tarob Ct. Milpitas, CA 95035 (408)
Visit our Web site at: www.sierramonitor.com
Rev. B 8/23/07