Product Warranty

1. Warranty

If a failure is observed in our Thermo Cooler, repair shall be provided in accordance with the warranty period and preconditions defined below at SMC’s option.

Repair involves the inspection and/or replacement and/or modification of a defective part. Removed parts shall become the possession of SMC.

2. Warranty period

The warranty period of the product shall be 1 year from the date of your purchase.

3. Warranty exemption

SMC’s liability under this warranty shall not be available for the following troubles and damages.

(1)Troubles or damage caused by the neglect of our designated inspection (daily inspection, periodic inspection)

(2)Troubles or damages caused by mishandling such as using improper operating procedure and using with our specifications violated

(3)Troubles or damages caused by unauthorized modification.

(4)Troubles or damages caused by the use of a not-designated circulating fluid and facility water

(5)Troubles or damages caused by wearing out such as fading on the coated or plated surface

(6)Sensory phenomena that are considered no effect on the functions (such as noise, vibration)

(7)Troubles or damages caused by natural disaster such as earthquake, typhoon, water, inevitable events and fire

(8)Troubles or damages occurred under the installation conditions defined in the Operation Manual

(9)Troubles or damages that are not compliant with the “5. Warranty preconditions”

4.Escape clause

(1)Expenses of daily inspection and periodic inspection

(2)Expenses of repair consigned with neither SMC nor our authorized service station

(3)Expenses of transport, installation, and removal of this system

(4)Expenses of removal of non-genuine parts and replenishment of non-genuine fluids

(5)Unavailability and loss due to this system being disabled (such as telephone bill, leave compensation, commercial loss)

(6)Expenses and compensation for terms other than provided in “1. Warranty”

5.Warranty precondition

Proper use and inspection of this system is required to assure safe use of this system. System warranty shall satisfy the following preconditions. Please take note that warranted repair shall not be available if these preconditions are disregarded.

(1)System operation shall be conducted by following operating procedure defined in the Operation Manual.

(2)Daily and periodic inspections designated in the Operation Manual shall be made as scheduled.

(3)Inspection record shall be entered in the Daily Inspection Sheet provided in the Operation Manual.

6.Request for warranted repair

As to warranted repair, please contact the supplier you purchased this system from for service. Warranted repair shall be on request basis.

Unrequited repair shall be provided in accordance with the warranty period, preconditions and terms defined above. Therefore, the repair service shall be available on a chargeable basis if a failure is detected after the warranty period.

HRG015-W, HRG010-W specifications

Sierra Monitor Corporation is renowned for its innovative solutions in the field of industrial monitoring and control. Among its noteworthy offerings are the HRG010-W and HRG015-W wireless gas detectors, specifically designed to enhance safety and efficiency in various industrial environments. These devices provide critical monitoring for hazardous gases, thereby ensuring compliance with safety regulations and creating a safer workplace for employees.

One of the main features of the HRG010-W and HRG015-W models is their advanced sensor technology, which enables accurate detection of hazardous gases, including but not limited to, methane, propane, and hydrogen. This precision is crucial for industries such as oil and gas, wastewater treatment, and chemical manufacturing where the presence of these gases can pose significant risks.

Both models are equipped with powerful wireless communication capabilities. They utilize Zigbee or Wi-Fi technologies to transmit real-time data back to a centralized monitoring system. This feature facilitates instant readings and alerts, allowing for timely interventions and reducing response times during emergencies. Operators can monitor gas levels remotely, thus enhancing operational efficiency and allowing for better resource allocation.

Another important characteristic of the HRG010-W and HRG015-W is their rugged design, tailored to withstand harsh industrial conditions. The enclosures are built with durable materials that resist moisture, dust, and corrosive substances. This durability ensures longevity and reliability in the field, which is paramount for continuous gas detection applications.

Furthermore, these gas detectors are designed with user-friendly interfaces that simplify setup and operation. The built-in display provides clear numerical readings and diagnostic information, while the intuitive controls make it easy for personnel to navigate functions and settings without extensive training.

In addition, both the HRG010-W and HRG015-W models can be integrated with existing control systems and safety measures, creating a comprehensive safety net. This compatibility supports various industry standards and allows facilities to modularly expand their safety networks as needed.

Overall, Sierra Monitor Corporation's HRG010-W and HRG015-W wireless gas detectors epitomize the intersection of technology and safety in industrial environments. With their advanced detection capabilities, robust design, wireless communication, and ease of use, these devices stand out as essential tools for mitigating the risks associated with hazardous gas exposure in a variety of applications.

Sierra Monitor Corporation HRG015-W, HRG010-W operation manual Product Warranty

Models: HRG015-W HRG010-W