Safety Instructions
The Digital Flow Sensor have in after referred to as flow sensor and this manual contain essential information for the protection of users and others from possible injury and property damage and to ensure correct handling.
Please check that you fully understand the definition of the following messages (signs) before going on to read the text, and always follow the instructions.
IMPORTANT MESSAGES
Read this manual and follow its instructions. Signal words such as WARNING, CAUTION and NOTE, will be followed by important safety information that must be carefully reviewed.
Indicates a potentially hazardous situation which could result in death or serious injury if you do not follow instructions.
Indicates a potentially hazardous situation which if not avoided, may result in minor injury or moderate injury.
Gives you helpful information.
Do not disassemble, modify (including change of printed circuit board) or repair.
An injury or failure can result.
Do not operate outside of the specification.
Fire, malfunction or flow monitor damage can result.
Please use it after confirming the specification.
Do not operate in an environment of inflammable, explosive or corrosive gas.
Fire or an explosion can result.
This flow monitor is not an explosion proof type.
To avoid fire and explosion, Do not use the product for flammable fluid.
This flow sensor is designed for air. Only dry air, N2, CO2, Ar are applicable.
Do not use this product near by a place where static electricity is a problem.
Otherwise it can cause failure or malfunction of a system.
These instructions must be followed while in maintenance ; Turn off the power supply, stop the supplied air, exhaust the residual pressure and verify the release of air before performing maintenance.
Otherwise it can cause injury.
To avoid electric shock, malfunction, and switch damage, Do not touch live terminal nor connector.
2 | 3 |
