EF5001U-B Pellet Heater

Installation & Operating Instructions

Please read this entire manual before installation. Save these instructions.

SAFETY NOTICE

<CAUTION: HOT WHILE IN OPERATION. KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT MAY CAUSE SKIN BURNS.

<IF THIS HEATER IS NOT PROPERLY INSTALLED, A HOUSE FIRE MAY RESULT.

<FAILURE TO COMPLY WITH OWNERS' MANUAL INSTRUCTIONS WILL VOID YOUR WARRANTY!

PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS PELLET FUEL- BURNING ROOM HEATER. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN

WARNING: THIS HEATER SHOULD NOT BE INSTALLED IN A SLEEPING ROOM.

INSTALLER: PLEASE LEAVE THIS MANUAL WITH

THE OWNER!!

Sierra Products, Inc.

5061 Brooks St., Ste. B

Montclair, CA 91763

GENERAL INFORMATION

Installation and repair should be done by a qualified service person. The heater should be inspected before use and at least annually by a professional service person. More frequent cleaning may be required due to fuel quality, excessive lint from carpeting, bedding material, etc. It is im perative that control com partm ents, burners and circulat- ing air passageways of the heater be kept clean.

The EASYFIRE Pellet heater has been designed and approved for burning wood pellet fuel only. Burning other form s of fuel is not perm itted and will void all warranties.

This unit has been approved for use with a 4" Type L Pellet Vent System .

NEVER use gasoline, gasoline-type lantern fuels, kerosene, charcoal lighter fluid, or sim ilar liquids to start or "freshen up" a fire. Keep all such liquids well away from the heater while it is in use.

Ashes must be disposed of in a m etal container with a tight fitting lid and placed on a noncom bustible floor or ground, well away from all fuels, pending final disposal.

NOTE : During the first few burns the high tem perature paint and sealant used in manufacture will emit some odor and sm oke. Open doors and windows to the outside for proper ventilation during the first burn cycle and curing of the paint.

This heater, when installed, m ust be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70-

2006.

Provide adequate clearances around air openings into the com bustion cham ber and adequate accessibility clearance for servicing and proper operation. Never obstruct the front opening of the heater.

The heater may be installed as a free-standing unit mounted on a non-com bustible protective floor pad or hearth. Or it

m ay be mounted into an existing U. L. approved wood stove chim ney. Non-com bustible floor protection is required and m ust be used when placing the heater on any com bustible m aterial.

The pellet heater must be operated with a power source and will not operate using natural draft. If there is a power failure the heater will shut down. If the 12 volt back system is in- stalled, the heater will autom atically switch to 12 volt power.

The EasyFire Pellet Heater has been listed by OMNI-Test Laboratories, Inc. to ASTM, U.L.,and EPA Standards.

Listed by OMNI-Test Laboratories, Inc.

Report No. 256-S-01-4

Page 2
Page 1
Image 1
Sierra Products EF5001U owner manual General Information, 2006, Listed by OMNI-Test Laboratories, Inc Report No -S-01-4
Page 2

EF5001U specifications

The Sierra Products EF5001U is a versatile and powerful electronic appliance designed for both home and industrial use. Known for its robust construction and innovative features, this model stands out in its category, providing users with unmatched efficiency and reliability.

One of the main features of the EF5001U is its impressive power output. With a maximum performance of 5000 watts, this appliance is capable of handling a wide range of tasks, from powering tools to supporting multiple devices simultaneously. This makes it ideal for both professional contractors and DIY enthusiasts who demand high-performance equipment.

The EF5001U integrates advanced inverter technology, which helps to deliver a clean and stable power supply. This technology is crucial for sensitive electronic devices, ensuring they operate safely without the risk of voltage spikes or surges. Additionally, the inverter allows for more efficient fuel consumption, leading to longer operational times between refueling, making it a cost-effective choice for extended use.

Portability is another key characteristic of the Sierra Products EF5001U. This model features a lightweight design complemented by integrated handles, allowing for easy transport and convenient storage. Whether you need it for outdoor activities, road trips, or emergency backup power, its portability ensures that it can accompany you anywhere.

Safety features are also a priority with the EF5001U. It comes equipped with automatic shut-off mechanisms that activate in the event of low oil levels or overheating, protecting both the unit and its users. Furthermore, the durable construction and weather-resistant materials ensure that the EF5001U can withstand harsh conditions, making it a reliable choice for various environments.

User-friendly controls and indicators simplify operation, allowing even individuals with minimal technical experience to use the unit effectively. The intuitive interface provides clear information about operational status, making it easy for users to monitor performance at a glance.

In conclusion, the Sierra Products EF5001U is a top-of-the-line electronic appliance that combines power, efficiency, and portability. With its advanced inverter technology, robust safety features, and easy-to-use design, it is well-suited for a wide range of applications, making it an excellent investment for anyone in need of reliable power solutions. Whether at home or on the job, the EF5001U is engineered to meet and exceed expectations.
Top Page Image Contents