Sierra Wireless 580 manual 24

Table 4-3: Settings Menu - General Tab Options Option Choices Description

Option	Choices	Description
Start in System Tray	On	When this option is enabled, Watcher will launch from the
Mode	Off (default to Full
		system tray. (See System Tray Mode on page 26).This
	Mode at launch)
		feature is turned off by default (it is unchecked) and
		Watcher launches in Full Mode.
Run AirCard 580	On (default)	When this option is enabled, Watcher automatically
Watcher at Startup	Off	launches when your notebook PC is powered on. Turning
		this feature “off” disables auto launch and Watcher may
		only be opened through the desktop shortcut or from the
		start menu (See page 17 in this
		chapter “Launching Watcher”).
Enable Auto-Connect	On	When this option is enabled, Watcher automatically
		establishes a connection at startup, and reestablishes a
	Off (Default)
		connection if the connection is dropped. If you prefer to
		manually establish a connection, turn the feature off
		(default).
Cal l Lost Alert	On (default)	When enabled, a pop-up window and warning sound notify
	Off	you when a connection is dropped.
Card Eject Warning	On (default)	When enabled, a message regarding proper card removal is
	Off	displayed when you exit Watcher.
Premium Service	On (default)	When enabled, a notification appears each time an a
		connection attempt the high-speed 3G CDMA 1xEVDO
Alert	Off
		BroadbandAccess network is made.
Tray Mode Alert	On (default)	When enabled, you are prompted to indicate whether you
		want to close Watcher or minimize Watcher when you
	Off
		select the system tray shortcut action button.
System Select	Automatic	The System Select menu displays the current selection
		when the Settings tool is launched while the modem is
	Automatic A
		connected and powered on. If the modem is not connected
	Automatic B
		or powered on, the menu will be grayed out. These settings
	Home Only
		cannot be changed during an active data call.
		Note: Do not change the default System Select
		option, unless instructed to do so by a CLARO
		Customer Service Representative
Security Lock	On	For security purposes, you have the option to lock the
	Off (default)	AirCard 580 when not in use. Place a checkmark in the
		check box entitled, “Lock Card” to enable this feature. By
		enabling this feature, the AirCard 580 locks, disabling any
		connection attempts, even if Watcher is set to "Auto
		Connect". Each time you use the AirCard 580, you are asked
		to enter a four-digit passcode. The default lock code is the
		last four digits of your Directory Number. To change your
		code, select “Change Lock Code” and follow the on-screen
		instructions.
		Tip: Access the About tab to locate your Directory
		Number or contact CLARO Customer
		Service.

24