Section 2A
Installing the Software
♦Installing the Software on a Windows Computer (page 6)
♦Installing the Software on a Mac Computer (page 9)
The installation process has two stages:
⬤Installing the Software and Drivers — Insert the USB modem to install the drivers and the software (for Windows, see below; for Mac, see page 9).
⬤Activating Your USB Modem — Start the software, and activate your account and configure the USB modem to use your account. For complete instructions, see the user guide.
Installing the Software on a Windows Computer
System Requirements
The Sprint Mobile Broadband USB modem is supported on:
⬤Windows Vista.
⬤Windows XP with Service Pack 2 or later.
Note
Your USB modem will not work with handhelds or Pocket PCs.
To install and run the USB modem and accompanying Sprint SmartViewSM software on a Windows computer, you will need one USB slot.
Note
Do not insert the USB modem or the USB extension cable into a USB hub or a USB slot on a keyboard.
6Section 2A. Installing the Software