WA_DEV_W218_PTS_002 Rev 005 Page 71 of 109
Product Technical Specification &
Customer Design Guidelines
This signal indicates the ready status of the WISMO218 after powering on. Please note that there is an
initial positive pulse of less than 200ms during power ON. For details, please refer to the power ON
diagram in the Power ON sub-section. Once the WISMO218 is properly powered ON, the
WISMO_READY pin will set to HIGH level to acknowledge the successful powering ON of the
WISMO218 before it is ready to operate.
On the other hand, the level will go LOW before powering off.
Features
Table 27. Electrical Characteristics of the Signal
Param eter
I/O Type
Minim um
Typ.
Maxim um
Unit
VOH
2V8
2.7
2.8
2.95
V
VOL
2V8
-
-
0.4
V
Pin Description
Table 28. WISMO_READY Indication Pin Descriptions
Signa l
Pin N umber
I/O
I/O Type
Descr iption
WISMO_READY
7
O
2V8
WISMO218 ready indication