
|
| SPECIFICATIONS | |
|
|
| |
Burst Rate | HI Mode: 1.9fps for 6 frames, MED Mode: 2.4fps for 14 frames, | ||
LOW Mode: 2.5fps for 30frames | |||
| |||
External Flash Synchronization | Hot shoe (contact X, with dedicated flash linking contact) | ||
LCD Monitor Type | 1.8”, Color TFT LCD with appr. 130,000 dot low | ||
polysilicon, Coverage Area : 100%, Backlight : White LED | |||
| |||
Reviewing Images | |||
9 segments thumbnail display, Slide Show | |||
| |||
Language | Japanese / English / French / Germany | ||
| Battery | Lithium CR(DL)123A x 2pcs. | |
Power Source | Lithium | ||
| “AA” | ||
|
| ||
| AC Adapter | ||
Dimensions | 152mm / 6”(W) x 120mm / 4.72”(H) x 79mm / 3.1”(D) | ||
Weight | 805g / 28.4oz (without battery) |
CONNECTING YOUR CAMERA TO A COMPUTER
The SD9 camera can be connected directly to a computer using the provided USB or IEEE 1394 (FireWireTM) cable. Make sure that the camera is off before connecting it to the computer. Data transfer rates will vary depending on the computer and operating system used. The fastest transfer rates can be obtained using IEEE 1394. For further information, please refer to the SIGMA Photo Pro User Guide, which is available in PDF format on the supplied
IEEE1394 Terminal (FireWire™)
The shutter button and color LCD monitor will be | USB Terminal |
| |
disabled while the camera is connected to the |
|
computer via a USB cable. |
|
The camera will shut down after 15 minutes of
Connect the IEEE1394 (FireWire™) directly to the computer please be sure that the other end of the cable can be connected to the computer’s IEEE 1394 terminal.
WARNING!!
Please use only the USB or IEEE 1394 cables supplied with your camera.
114