OVER-EXPOSURE WARNING

Highlight areas of an image where detail may be lost due to over-exposure will be indicated by a solid red overlay when Exposure Warning is set to On in the Camera Set-up Menu. The over-exposure overlay will be visible in the all views except for Contact Sheet and Jump Mode. The over-exposure overlay will also be hidden during a slideshow.

TO TURN OFF OVER-EXPOSURE WARNING

1

Make sure the camera is turned on.

2

Press the ＜ MENU＞ button on the back of the camera to display the Camera Set-up Menu. (See P.96)

3

Use ＜ ／ ＞ arrows on the 4-way controller to select “Exposure Warning”.

4

Press ＜ ＞ arrow or ＜ OK ＞ to open sub-menu.

5

Use ＜ ／ ＞ arrows on the 4-way controller to select “Off”.

6

Press ＜

 

＞ arrow or ＜

 

OK＞ to apply the

 

 

 

 

 

 

 

or ＜

 

CANCEL＞

setting or ＜

 

＞ arrow

 

 

 

 

 

 

 

 

 

 

 

 

to close the sub-menu without making any changes.

TIP

￿The ＜ OK＞ button can be used as a shortcut key to temporarily toggle the over-exposure warning overlay on or off. Using the shortcut key will not change the Exposure Warning setting in the Set-up Menu. (See P.90 to set OK key shortcut.)

75