MARKING IMAGES

TO MARK A SINGLE IMAGE

1

Use the ＜／／ ／ ＞ arrows on the

4-way controller to select the image to be marked in Contact Sheet or Single-Image View.

2

Press ＜ MOD＞ to display the Modification

Menu.

3

Use the ＜ ／ ＞ arrows on the 4-way controller to select the Mark Menu.

4

Use the ＜ ／ ＞ arrows on the 4-way controller to select “Mark”.

￿If the selected image is already marked, the “Mark” menu item will change to “Unmark”.

5

Press ＜ OK＞ to mark the image. A flag icon will appear in the upper-right corner of the image indicating that the image is marked.

TIP

￿To unmark a marked image, select the marked image and follow the same steps as above.

￿If the Mark Menu was opened from Jump Mode, the “Mark” menu item will not be available.

￿The ＜ OK＞ button can be used as a shortcut key for marking images. (See P.90)

86