Low Profile PCI I/O

Quick Installation Guide

Introducing the Low Profile PCI I/O

The Low Profile PCI I/O conforms to the new PCI card form factor standard made for space constrained system designs. Since this installation guide is written for both, Low Profile PCI -1S and Low Profile PCI -1Pboards, some features on this installation guide might not be present on the model you bought. Please only refer to the features that apply to your board.

Features and Benefits

Conforms to PCI v2.2 Plug and Play

Full support for DOS- and Windows-based software

IRQ sharing feature eliminates IRQ conflicts

Serial interface:

High-speed 16550 UART serial port (9-pin) supports baud rates up to 920Kbps. Works with various types of serial devices

Built-in 16-byte FIFO buffers dramatically increase data transmit/ receive speed

Parallel interface:

Conforms to IEEE 1284-1994 parallel port standard

High-speed parallel port supports various types of parallel port devices

Supports EPP, ECP(PIO mode), Bi-directional Parallel Port (BPP) and Standard Parallel Port (SPP) modes

Dimensions:

PCB: 119.91 mm (L) x 64.41 mm (H)

Bracket: 18.42 mm (W) x 79.20 mm (H)

System Requirements

Pentium or equivalent computer with an available 32-bit PCI slot

DOS/Windows 3.1x, Windows 95/98/98 SE/ME/NT 4.0/2000

04-0202A

1

Page 1
Image 1
SIIG 04-0202A dimensions Features and Benefits, Dimensions, System Requirements, Serial interface, Parallel interface