RAID Arrays
RAID arrays are setup in the Serial ATA PCI RAID BIOS. Find your RAID set from the table of contents. Follow the steps in the order in which they appear.
Table of Contents |
|
RAID 0 (Striping) | page |
RAID 1 (Mirror) | page |
Rebuilding a Failed Mirror Set | page |
Deleting RAID Arrays | page 8 |
Resolving Conflicts | page 8 |
Low Level Format | page 9 |
RAID 0 (Striping)
This RAID array to be used on New/Blank hard drives. Striping will destroy existing data on the hard drive.
Note: It is recommended to use Auto configuration. For Advanced users or software applications that require a custom chunk size, Manual configuration is offered.
For Auto Configuration
The default chunk size is 64k when selecting Auto configuration.
1.As the BIOS boots press Ctrl+SorF4when prompted to enter the RAID BIOS.
2.At the next screen select Create RAID Set, then press Enter.
3.Select Striped, then press Enter.
4.Select Auto configuration, then press Enter.
5.When asked Are You Sure (Y/N)?, press Y to accept.
5
