SIIG 04-0600B manual M4 x 8mm Flat Head Machine Screw Back Speaker

2.Once the proper configuration is determined, secure the post to the speaker.

3.Some speakers use the smaller M4 x 8 screw, which is inserted into the off-center on the mounting post, see Figure 2 below.

M4 x 8mm Flat Head

Machine Screw

Back Speaker

Figure 2

4.Check the size of the hole, make sure you have the 8-32 x 5/8" machine screw, the 1/4"-20 x 1/2" machine screw, the M6 x 20mm, or the M5 x 20mm fits inside, see Figure 3 below.

Back Speaker	M5 x 1/8" Plastic Washer
	8-32 x 5/8" Machine Screw
	1/4"-20 x 1/2" Machine Screw

Figure 3

4