USB 3.0 Cable Connectors
Type-A connector | Type-B connector |
Figure 2: USB 3.0 Connectors
Installation
Important: The SuperSpeed USB 4-Port Hub only works at USB 3.0 speed when connected to a USB 3.0 controller. Otherwise it will work as a USB 2.0 or USB 1.1 hub when connected to USB 2.0 or USB 1.1 controller respectively.
In order for the SuperSpeed USB 4-Port Hub to work as a USB 3.0 hub, the driver for your existing USB 3.0 host controller has to be properly installed. This hub will automatically be detected and installed when connected to the USB 3.0 port.
1.Connect the Type-B connector of the included USB 3.0 cable to the Upstream port (Root Port, Type-B)of the SuperSpeed USB 4-Port Hub.
2.Connect the Switching power adapter into the Power jack of the SuperSpeed USB 4-Port Hub, then plug the power adapter into a reliable power source.
