Dip Switch
Switch Position |
|
|
|
| ||
|
| Video | Audio | Description | ||
Pin#1 | Pin#2 | |||||
|
|
|
| |||
|
|
|
|
|
| |
OFF | OFF | Up to | Stereo | 1 | Default mode2 - up to 1080p & stereo | |
1080p |
| audio output for most HDTVs | ||||
|
|
|
| |||
|
|
|
|
|
| |
|
| Up to |
|
| Safe Mode3 - enforce 720p/1080i video | |
OFF | ON | Stereo | & stereo audio output for basic | |||
720/1080p | ||||||
|
|
|
| compatibility among HDTVs | ||
|
|
|
|
| ||
|
|
|
|
|
| |
| OFF | Bypass4 |
|
| EDID Learning5 - learning EDID from | |
ON | Bypass4 | the display while playing any received | ||||
|
|
|
|
| HDMI audio format | |
|
|
|
|
| EDID Learning5 & Stereo - learning | |
ON | ON | Bypass | Stereo | EDID from the display & enforcing | ||
|
|
|
|
| stereo output | |
1If the HDTV shows video without audio, set audio mode to stereo
2Factory default setting is Pin#1 - OFF, Pin #2 OFF, for 1080p with stereo
3If you encounter unsolved audio/video output problem during system installation, please set the DIP switch to Pin #1 - OFF, Pin #2 - ON to enforce 720p with stereo output to check the system. Also, make sure to reset your HDMI sources to output 720p
4Setting at this mode may cause compatibility issues amongst different HDMI sources and displays. If you cannot get the audio and/or video output, change the DIP switch setting to default mode or safe mode to verify the functionality of the device
5EDID learning mode - set Pin #1 - ON first then connect the HDTV set to the HDMI In via HDMI cable, wait for 20 seconds to complete the EDID learning process. To learn the EDID of another HDTV, repeat the process.
3
