Hardware Installation
Broadcasts HDMI signals to up to 4 remote displays.
1.Switch off all devices, including display(s).
2.Connect your HDMI source (such as a
3.Connectthe1x4HDMI1.3CAT5eDistributionAmplifier to the receivers
4.Connect the HDMI cable(s) from the receivers (CE-
5.Plug the included power adapter into the +5VDC power adapter jack of the 1x4 HDMI 1.3 CAT5e Distribution Amplifier.
6.Power on all devices.
Notes
1.If the HDMI device requires the EDID information, please use a EDID Reader/Writer (not included) to retrieve and provide the EDID information.
2.All HDMI over CAT5 transmission distances are measured using Belden CAT5e 125MHz LAN cable and ASTRODESIGN Video Signal Generator VG- 859C.
3.The transmission length is largely affected by the type of LAN cables, the type of HDMI sources, and the type of HDMI displays. The testing result shows solid LAN cables (usually in bulk cable 300m/1000ft form) can transmit longer distances than stranded LAN cables (usually in patch cord form).
4