5.Slide the lower cover back into the case and secure it with the two mounting screws, then slide the upper cover back into the case and secure it with the two mounting screws.
6.Use the included USB 2.0 data cable to plug the 2.5" USB 2.0 to SATA Enclosure into the computer.
7.Plug the optional USB power cable into a reliable USB port. This step is only needed when the USB data connector doesn't provide enough power to power up the enclosure.
8.The 2.5" USB 2.0 to SATA Enclosure will turn on automatically. Make sure that the LED is lit.
Go to Driver Installation to complete the installation in the next page.
Driver Installation
Windows will automatically detect and install drivers for the 2.5" USB 2.0 to SATA Enclosure. No additional driver installation is needed.
6
