ubSwitch Utility
In order to use a DV camcorder with this controller, Microsoft's FireWire 400 driver must be installed in the system. We have supplied an easy to use utility that allows switching between Microsoft's driver and the FireWire 800 driver. Before using this utility, unplug all devices from the FireWire 800 card.
1.Click Start, Programs, Unibrain ubcore, Tools then ubSwitch.
2.Right click the ubSwitch icon located in the system tray by the clock.
3.Click the 1394 Adapter that you want to switch, then click on Microsoft 1394 Drivers.
Note: If your system has multiple 1394 adapters installed, make sure that you click on the 1394 adapter that the camcorder will be plugged into.
4.Windows will display an information box when the driver is ready for use. It may take a few seconds for this box to appear.
Note: To switch back to the FireWire 800 driver, follow the same procedures, but in step 3 instead of clickingonMicrosoft1394Drivers, clickonUnibrain 1394 Drivers.
10
