SIIG 700 manual Driver Installation, Windows2000, Windows XP 32-bit

Driver Installation

This section provides information on how to install the FireWire 800 ExpressCard drivers.

Windows2000

Windows 2000 automatically installs it's built-in 1394a driver for the FireWire 800 ExpressCard. To get the full speed out of this controller, install the Firewire 800 driver using the directions below.

1.Insert the driver CD. Click Start, Run. Type D:\setup32.exe, click OK. (Change D: to match your CD-ROM drive letter)

2.At the Welcome screen, click Next.

3.At the License Agreement screen, click Yes.

4.At the Destination Location screen, click Next.

5.Select Complete, then click Next.

6.At the Program Folder screen, click Next.

7.At the Digital Signature screen, click Yes, then click Finish.

8.Select the restart Windows option, then click Finish.

Windows XP (32-bit)

Windows XP automatically installs it's built-in 1394a driver for the FireWire 800 ExpressCard. To get the full speed out of this controller, install the Firewire 800 driver using the directions below.

1.Insert the driver CD. Click Start, Run. Type D:\setup32.exe, click OK. (Change D: to match your CD-ROM drive letter)

2.At the Welcome screen, click Next.

3