SIIG 701P48438 manual Windows Driver Installation, USB 2.0 Driver Installation

Windows Driver Installation

The instructions below are divided into two sections, USB 2.0 and FireWire 800. To ensure proper installation of this board, please follow the instructions step-by-step.

USB 2.0 Driver Installation

For Windows 2000 (with SP4 or later)/XP (with SP1 or later)/2003/Vista

Windows will automatically detect and install it's built-in USB 2.0 driver. No additional driver installation is needed. The board will operate at USB 2.0 speed.

For Window 2000 (with SP3 or earlier)

Windows will automatically detect and install it's built- in USB 1.1 driver. The board will operate at USB 1.1 speed.

1.At the Found New Hardware Wizard, click Next.

2.Select Search for the best driver..., click Next.

3.Uncheck all boxes, then click Next.

4.Select Disable the Device..., then click Finish.

XP (without SP1)

Windows will automatically detect and install it's built- in USB 1.1 driver. The board will operate at USB 1.1 speed.

1.At the Found New Hardware Wizard select Install the software automatically, then click Next.

2.Select No, do not connect to the internet now, then click Next.

3.Check Don't prompt me again to install this software, then click Finish.

6