Layout
Figure 1: Layout
LED Indicators
See Figure 2 on the next page for the location of the LEDs.
•Red: Power indicator - on all the time.
•Green: Before connecting to synchronize between the serial device and the BT RS232 Config Tool software, the green LED will be blinking.After connecting to synchronize between the device and the BT RS232 Config Tool software, the green & red LED will blinked alternately.
DC-In Power Jack
Connect the power adapter to the power jack then plug the power adapter into a reliable power outlet. When power is properly supplied, the red LED will be on, see Figure 2 on the next page.
Note: If the serial port can provide 5V DC, 150mA on pin #9 of its DB9 connector, then the power adapter is not needed.
2
