SIIG UM022_02 user manual Connecting

6. Connecting

6.1. keyboardCUE-S...........................................................

This model of the keyboard is connected to the system by CUEwire. The keyboard is equipped with 3 m length or 10 m length cable with 4-pin connector. Pin connection of the CUEwire connector is described in the following table.

CUEwire, 4-pin connector

1 2 3 4

Pin 1	+24 VDC
Pin 2	GND
Pin 3	A+

Pin 4

B-

6.2. keyboardCUE-S /w .....................................................

This model of the keyboard is connected to the system by CUEwire.

The keyboard is equipped with 4-pin terminal which is located on the rear side of the keyboard - see picture below.

	PCB
+24 VDC
A+	CUEwire terminal
B-
Ground

User Manual Small Keyboards

www.cuesystem.com

Page 11 of 18